Skip to content

Prefixes

A prefix is an IPv4 or IPv6 network and mask expressed in CIDR notation (e.g. 192.0.2.0/24). A prefix entails only the "network portion" of an IP address: All bits in the address not covered by the mask must be zero. (In other words, a prefix cannot be a specific IP address, except in the case of /32 IPv4 prefixes and /128 IPv6 prefixes.)

Each prefix belongs to a specific namespace, and is unique within that namespace. Each prefix can also optionally be assigned to a particular location(s), as well as to zero or more virtual routing and forwarding (VRF) instances. All prefixes not assigned to a VRF are considered to be in the "global" VRF within their namespace.

Changed in version 2.0.0

In Nautobot 1.x, prior to the introduction of the namespace data model, a prefix might or might not be unique within its assigned VRF. In Nautobot 2.0, prefixes are always unique within their namespace. You may need to do some cleanup of your data after migrating from Nautobot 1.x to suit the new data requirements.

Changed in version 2.2.0

A Prefix can now be assigned to multiple Locations if desired.

Each prefix must be assigned a status and can optionally be assigned a role. These terms are often used interchangeably so it's important to recognize the difference between them. The status defines a prefix's operational state. The following statuses are provided by default:

  • Active - Provisioned and in use
  • Reserved - Designated for future use
  • Deprecated - No longer in use

Changed in version 2.0.0

The "Container" status was removed and its functionality was replaced by the Prefix.type field.

On the other hand, a prefix's role defines its function. Role assignment is optional and roles are fully customizable. For example, you might create roles to differentiate between production and development infrastructure.

A prefix may also be assigned to a VLAN. This association is helpful for associating address space with layer two domains. A VLAN may have multiple prefixes assigned to it.

The prefix model can be set to one of three types through the type field. The valid prefix types are:

  • Container
  • Network (default)
  • Pool

If a prefix's type is set to "Pool", Nautobot will treat this prefix as a range (such as a NAT pool) wherein every IP address is valid and assignable. This logic is used when identifying available IP addresses within a prefix. If type is set to "Network", Nautobot will assume that the first and last (network and broadcast) addresses within an IPv4 prefix are unusable.

Changed in version 2.0.0

The is_pool field was removed and its functionality was replaced by the Prefix.type field.

A prefix can be assigned to an RIR to track which RIR has granted your organization permission to use the specified IP space on the public Internet.

The date_allocated field can be used to track any date and time you would like to define as the "allocated date" for a prefix. This could be the date an RIR assigned a prefix to your organization or the date a prefix was assigned to a specific internal team.

Added in version 2.0.0

The date_allocated and rir fields were added, migrating data from the removed Aggregate model.

Prefix utilization calculation

Changed in version 2.0.0

The get_utilization method on the ipam.Prefix model has been updated in 2.0 to account for the Prefix.type field. The behavior is now as follows:

  • If the Prefix.type is Container, the utilization is calculated as the sum of the total address space of all child prefixes.
  • If the Prefix.type is Pool, the utilization is calculated as the sum of the total number of IP addresses within the pool's range.
  • If the Prefix.type is Network:
    • The utilization is calculated as the sum of the total address space of all child Pool prefixes plus the total number of child IP addresses.
    • For IPv4 networks larger than /31, if neither the first or last address is occupied by either a pool or an IP address, they are subtracted from the total size of the prefix.

Prefix hierarchy

Added in version 2.0.0

Prefixes and IP addresses within a namespace are organized into a hierarchy using the parent field. There is guidance for the types of prefixes that can be assigned as parents:

  • A Prefix of type Container should only have a parent (if any) of type Container
  • A Prefix of type Network should only have a parent (if any) of type Container
  • A Prefix of type Pool should only have a parent (if any) of type Network
  • Any Prefix can be a root prefix (i.e. have no parent)

Warning

In a future release of Nautobot, this guidance will become an enforced data constraint.